Leeb Hardness Measuring Instrument Hardness Testing Of Metallic
Materials
Functions & Features
● High quality metal shell
● Precise measuring performance
● Automatically identify 7 types of Impact devices for special
application
● Direct calibrate on HL,HRC,HB, and freely switch to 6 different
hardness scales
● Test at any angle, even upside down
● Large LCD screen with back-light, showing all functions and
parameters
● Conversion to tensile strength (U.T.S)
● PC Software for data transmission, analysis and measurement
reports printing
Measuring Materials
● 10 types of metals: steel and cast steel, alloy tool steel,
stainless steel, gray cast iron, nodular cast iron, cast aluminum
alloy, copper zinc alloys, copper and tin alloy, copper, forged
steel.
Application Fields
● The bearings and other parts, heavy work-pieces, metal material,
pressure vessel, failure analysis of turbine generator unit and
equipment
● Mechanical or permanent assembly components have been installed,
the test space is very narrow, requires the original record regular
test results
● Large work-piece within a wide range of more rapid test
measurement site
Technical Specification
| Model | Uee912 |
| Measuring Range | (170-960)HLD,(17.9-69.5)HRC,(19-683)HB,(80-1042)HV,(30.6-102.6)HS,
(13.5-101.7)HRB |
| Hardness parameter | HL, HRC,HRB, HS,HB,HV |
| Accuracy | within ±6HLD |
| Memory | 600 groups |
| PC Connection | Available |
| Battery | 2*AA |
| Operating Temperature | -20℃~+60℃ |
| Dimensions | 130×70×30mm |
| Weight | 300g |
| Standard Configuration | Main unit, Impact Device type D, Calibration block,Small supporting
ring, Cleaning brush, Coin screwdriver, Operation
manual,Certificate. |
| Optional Accessories | Optional Impact Devices(D,DC,DL,D+15,G,C,E), Shaped support rings,
Testing blocks |
Able to calibrate on HL,HRC,HB Blocks
